XGuard RPM Opposite side SuperSensor with Static discharge protection and sensor power buffering

$28.95

XGuard RPM Opposite side SuperSensor with Static discharge protection and sensor power buffering is the most advanced RPM sensor to date. We recently discovered that in some cases the rotating elements passing near an RPM sensor can generate Electro Static Discharges (ESD). These have the risk of confusing or even damaging your receiver/fbl unit. The manufacturers of sensors also require that the power feeding the sensor be buffered next to eh sensor to prevent false pulse signals. Based on these requirements we developed the first RPM Sensor with Static Electricity protection and power buffering at the sensor. This sensor provides the cleanest and most precise RPM pulse to date. This is the sensor recommended for the Gasser conversions using the Zenoah 200 series engines and the mounting bracket from GasPoweredHelicopters.

Sensor kit Includes:
1 Sensor with components on two sides.
2 Magnets
2 M2.5 Screws
2 M2.5 washers
2 M2.5 nuts
1 Fan-side motor mounted extension plate for 90 sized engines
1 Fan-side motor mounted extension plate for 50 sized engines
1 Heat Shrink Tubbing
___
12 Items per kit

You May also like.....

Loading...

Description


Click here to read the manual

XGlowXGlow Igniter

Normal Standard Functions:
· Both Push ON Switch and Radio Switch
· Audio feedback warns when glow plug is defective
· A three position switch can be used for 1) OFF 2) Locator Buzzer and 3) Glow Plug On

Built-in Additional Functions (if you want to use them):

· If throttle connected to port 1 Bottom it won’t start wen open (Not Hot Starts)
· If RPM sensor connected it will monitor RPM and throttle and will stop a runaway engine when it sees RPM while throttle is disconnected (Chicken Dance prevention)


Normal Standard Functions:

Normal Standard Functions:
· Push ON Switch turns glow on for 15-Second increments
· Audio feedback warns when glow plug is defective
· Can also be turned on via receiver channel.
· A three-position switch can be used for OFF, Locator ON and Glow Plug ON

Small SizeSmallest Full-Featured
Glow Igniter

FeaturesMost features of
any Glow Igniter

Built-in Additional Functions
(if you want to use them):

· If a three-position switch is used you can use the middle position to activate a Locator Alarm Buzer to find a lost aircraft.
· Alarm Buzzer and Glow Plug On
· If throttle connected it won’t start with a full open throttle preventing hot starts and it can turn on while idling (landing).
· If RPM sensor connected it will monitor RPM and throttle and will stop a runaway engine if it sees RPM while throttle is disconnected (Chicken Dance prevention)

Additional information

Weight 0.5 oz

Most popular