XGuard Plus C25 V2 Power Backup System 25F w/Telemetry, Alarm, Remote Off & Radio Switch ports


SKU: AAVXG0119 Category: Tag:

***NOTE***: To activate the radio switch hold the OFF button while powering the unit. To deactivate repeat the process

Regarding sizes, The 25 is mostly used in models where there is little space to install a 50 or 82. The larger the size the more time you have to land but all models will give you plenty for landing for any size helicopter.

Note: Maximum input voltage is 8.2V

You May also like.....



Click here to read the manual

XGuard Plus V2 C25Backup for smaller Helis

Backup Power Pack with 25 Farad capacitors with Telemetry, Alarm, Remote Off & Radio Switch ports
Two Telemetry ports
One Remote Off port
One Alarm port
Servo Back EMF protector
Static electricity protector

The red light is activated only when there is current consumption. 

When you disconnect the power if there is no consumption the unit will not sense a drop in voltage so it won’t trigger on.

When you’re flying the simple forces of the blades make the consumption constant so it will trigger instantly.
To activate the switch off function you need to Press the off button while powering it up so you see all the LED lights flash three times.

You can always know if the radio switch feature is activated by looking at the number of times all the lights blink when powered up.

Please watch this video for more information.

Futaba Telemetry

How to connect to Futaba telemetry. 

To connect to a Futaba System you need to buy a Futaba Temperature Sensor so that you can use it to simulate a temperature alarm to indicate that the XGuard Plus has been activated.

Additional information

Weight 1.3 oz


Made in:


Most Recent